![background image](http://html1.mh-extra.com/html/omron/f3s-tgr-cl_a/f3s-tgr-cl_a_installation-and-operation-manual_741286023.webp)
9
SECTION 6
Setting F3S-TGR-CL features
!WARNING
Make sure that foreign objects such as water, oil, or dust do not enter the
inside of the F3S-TGR-CL system while the cover for the selector switches is
open.
6-1
Access to the selector switches
The switches are located behind a cover on both the transmitter and receiver.
The covers are opened by loosening two retaining screws (see illustration
below).
Disconnect the power supply before changing the switch settings.
6-1-1
Selector switch setting
Note
Make sure to set always switches in both banks to the same position
(except switch 7 on the receiver).
1 2 3 4 5 6 7 8
OFF
ON
= dip-switch level position (Factory default setting)
1 2 3 4 5 6 7 8
OFF
ON
OFF is the upper position and
ON is the lower position.
F06E-EN-03A+F3S-TGR-CL_K+OperManual.book Seite 9 Dienstag, 4. Oktober 2011 1:32 13