Omron CJ1W-SCU41, Operation Manual

Page: 464 / 526

445
Appendix M
V600/V620 ID Controller Protocol
The V600/V620 ID Controller Protocol is used to make various settings or control remotely the ID Controller
Connected to the Serial Communications Unit/Board via RS-232C or RS-422 cable.
Protocol Configuration
The configuration of the V600/V620 ID Controller Protocol is shown below.
Sequence
No.
Communications
sequence name
Function Ladder interface
Send word
allocation
Receive word
allocation
500 (01F4) Read (ASCII/1) Used when the number of Heads to be read
from the Carrier is 1. Yes Yes
501 (01F5) Read (ASCII/2) Used when the number of Heads to be read
from the Carrier is 2. Yes Yes
502 (01F6) Read (ASCII/4) Used when the maximum number of Heads to
be read from the Carrier is 4. Yes Yes
503 (01F7) Read (ASCII/8) Used when the maximum number of Heads to
be read from the Carrier is 8. Yes Yes
504 (01F8) Read (Hex/1) Used when the number of Heads to be read
from the Carrier is 1. Yes Yes
505 (01F9) Read (Hex/2) Used when the number of Heads to be read
from the Carrier is 2. Yes Yes
506 (01FA) Read (Hex/4) Used when the maximum number of Heads to
be read from the Carrier is 4. Yes Yes
507 (01FB) Read (Hex/8) Used when the maximum number of Heads to
be read from the Carrier is 8. Yes Yes
508 (01FC) Auto-read (ASCII/1) Used when the number of Heads to be read
from the Carrier is 1. Yes Yes
509 (01FD) Auto-read (Hex/1) Used when the number of Heads to be read
from the Carrier is 1. Yes Yes
510 (01FE) Polling Auto-read
(ASCII) Used when the number of Heads to be read
from the Carrier is from 1 to 8. Yes No
511 (01FF) Polling Auto-read
Subcommand
(ASCII/2) Used when the number of Heads to be read
from the Carrier is 2. Yes Yes
512 (0200) Polling Auto-read
Subcommand
(ASCII/4) Used when the maximum number of Heads to
be read from the Carrier is 4. Yes Yes
513 (0201) Polling Auto-read
Subcommand
(ASCII/8) Used when the maximum number of Heads to
be read from the Carrier is 8. Yes Yes
514 (0202) Polling Auto-read
(Hex) Used when the number of Heads to be read
from the Carrier is from 1 to 8. Yes No
515 (0203) Polling Auto-read
Subcommand (Hex/2) Used when the number of Heads to be read
from the Carrier is 2. Yes Yes
516 (0204) Polling Auto-read
Subcommand (Hex/4) Used when the maximum number of Heads to
be read from the Carrier is 4. Yes Yes
517 (0205) Polling Auto-read
Subcommand (Hex/8) Used when the maximum number of Heads to
be read from the Carrier is 8. Yes Yes
518 (0206) Write (ASCII/1) Used when the number of Heads to be written
to the Carrier is 1. Yes No