Omron 3G3AX-MX2-PRT-E, User Manual

Page: 39 / 116

25
Configuring the Option Board
Section 3-1
Apply the source selection parameters according the following table for the
RX Option Board.
Step 6 The PPO modules and Flexible module give you the freedom to select/cus-
tomise the Inverter Modbus registers for Cyclic Data Exchange. Inverter regis-
ters P160 - P179 are used to configure and map the exchanged Modbus
registers. If required, adjust these registers to change the default content of
the exchanged data. Please refer to Appendices
B-1 I/O Mapping on page 76
and Flexible I/O Mapping on page 83 for more details.
Param Description Setting
P033 Torque Command
Source For Option Board as source:
Set to 7 (Use Option Board register) if P182
equals 1
Set to 3 (Use P034) if P182 equals 0 or 2
P036 Torque Bias Mode For Option Board as source:
Set to 6 (Bias set by Option Board) if P182
equals 1
Set to 0 (Bias according to sign) or 1 (Bias accord-
ing to rotation direction) if P182 equals 0 or 2
C021 Output Terminal 11
Source Set to 63 for Option Board as source
C022 Output Terminal 12
Source Set to 63 for Option Board as source
C026 Alarm Relay Output
Terminal Source Set to 63 for Option Board as source (Optional)
C028 Analog Output AM
Source Set to 20 for Option Board as source
Table 12 Configuration of input and output content
Param Description Setting
P160 Output Register 1
contents Modbus register mapped into PZD1 or flexible out-
put word 1
P161 Output Register 2
contents Modbus register mapped into PZD2 or flexible out-
put word 2
P162 Output Register 3
contents Modbus register mapped into PZD3 or flexible out-
put word 3
P163 Output Register 4
contents Modbus register mapped into PZD4 or flexible out-
put word 4
P164 Output Register 5
contents Modbus register mapped into PZD5 or flexible out-
put word 5
P165 Output Register 6
contents Modbus register mapped into PZD6 or flexible out-
put word 6
P166 Output Register 7
contents Modbus register mapped into PZD7 or flexible out-
put word 7
P167 Output Register 8
contents Modbus register mapped into PZD8 or flexible out-
put word 8
P168 Output Register 9
contents Modbus register mapped into PZD9 or flexible out-
put word 9
P169 Output Register 10
contents Modbus register mapped into PZD10 or flexible
output word 10
P170 Input Register 1 con-
tents Modbus register mapped into PZD1 or flexible
input word 1
P171 Input Register 2 con-
tents Modbus register mapped into PZD2 or flexible
input word 2
P172 Input Register 3 con-
tents Modbus register mapped into PZD3 or flexible
input word 3
P173 Input Register 4 con-
tents Modbus register mapped into PZD4 or flexible
input word 4
I111E-EN-02+3G3AX-MX2-RX-PRT+OperManual.book Seite 25 Donnerstag, 8. September 2011 11:53 11