![background image](http://html1.mh-extra.com/html/omron/3g3ax-mx2-prt-e/3g3ax-mx2-prt-e_user-manual_742058083.webp)
69
Maintenance and Inspection
Section 5-3
Step 4
Unscrew the Option Board grounding
cable, mounted with an Inverter
grounding bold.
Step 5
Gently pull the Option Board straight
out while pushing down on the indi-
cated spots to release the snap-fits..
Be careful not to stress the flex cable
Step 6
Remove the flex cable from the
inverter by pulling on the indicated
locations.
Step 7
Purpose: mount the new Inverter
Connector (no.1) of the Option Board
onto the interface connector (no.5) of
the RX Inverter.
How to do:
First align the small hole of the
Inverter connector (no.2) with the
guide-post (no.4) in the Inverter.
G
A
1
2
3
I111E-EN-02+3G3AX-MX2-RX-PRT+OperManual.book Seite 69 Donnerstag, 8. September 2011 11:53 11
Summary of Contents for 3G3AX-MX2-PRT-E
