4
Introduction to PROFIBUS
Section 1-3
1-3
Introduction to PROFIBUS
1-3-1
The Purpose of PROFIBUS
PROFIBUS (PROcess FIeldBUS) is an open fieldbus standard for a wide
range of applications in manufacturing, processing and building automation.
The Standard, IEC 61158 (Industrial communication networks), to which
PROFIBUS adheres, guarantees vendor independence and transparency of
operation. It enables devices of various manufacturers to intercommunicate
without having to make any special interface adaptations.
1-3-2
What is PROFIBUS DP
PROFIBUS DP (for Decentralized Periphery) is a variant optimized for high
speed and low-cost interfacing. It is specially designed for communication
between automation control systems and distributed I/O at the device level.
PROFIBUS DP uses the same transmission technology and uniform bus
access protocol as PROFIBUS FMS (for Fieldbus Message Specification).
Consequently, both versions can be operated simultaneously on the same
bus. DP field devices, however, cannot be controlled by FMS masters and
vice versa.
!Caution
It is not possible to exchange a PROFIBUS DP device or master for a PROFI-
BUS FMS device or master. This will cause faulty operation.
Table 1 Option Board Specifications (continued)
Item
Specification
PROFIBUS DP
Services and
Profiles
Master Class 1 – Slave
cyclic services
Set_Prm
Chk_Cfg
Slave_Diag
Data_Exchange
Get_Cfg
Rd_Inp
Rd_Outp
Global-Control (
SYNC/UNSYNC, FREEZE/UNFREEZE & CLEAR
)
Master Class 1 – Slave
acyclic services
Not supported
Master Class 2 – Slave
acyclic services
MSAC2_Initiate
MSAC2_Read
MSAC2_Write
MSAC2_Abort
Profiles supported
PROFIdrive V2
(If P182 = 0)
Conventional
(If P182 = 1)
Flexible
(If P182 = 2)
Supported I/O modules
PROFIdrive V2
(If P182 = 0)
PPO Type 1 (4 words PKW + 2 words PZD)
PPO Type 2 (4 words PKW + 6 words PZD)
PPO Type 3 (2 words PZD)
PPO Type 4 (6 words PZD)
PPO Type 5 (4 words PKW + 10 words PZD)
Conventional
(If P182 = 1)
Basic Data
Extended Data 1
Extended Data 2
Flexible
(If P182 = 2)
Flexible (10 words output and input)
I/O Data
I/O data
28 bytes max. input data using PPO Type 5
28 bytes max. output data using PPO Type 5
Diagnostics data size
11 bytes
MX2 GSD file
OC_0C6A.gsd
RX GSD file
OC_0D2F.gsd
I111E-EN-02+3G3AX-MX2-RX-PRT+OperManual.book Seite 4 Donnerstag, 8. September 2011 11:53 11
Summary of Contents for 3G3AX-MX2-PRT-E
