![background image](http://html1.mh-extra.com/html/omron/3g3ax-mx2-drt-e/3g3ax-mx2-drt-e_user-manual_740780081.webp)
67
Control Supervisor Object (Class 0x29)
APPENDIX D
Note
The following table shows the conversion between the MX2 Error or Trip code
and the CIP Fault and Warning codes.
Table D-5 Error Code Conversion
MX2 Error/Trip code
CIP Fault and Warning Code
Code
Name
Code
Name
E01
Over-current event while at con-
stant speed
2200 Current Inside the Device
E02
Over-current event during deceler-
ation
2214 Overcurrent during Slowdown
E03
Over-current event during acceler-
ation
2213 Overcurrent during Startup
E04
Over-current event during other
conditions
2200 Current Inside the Device
E05
Overload protection
2220 Continuous Overcurrent
E06
Braking resistor overload protec-
tion
7112 Brake Chopper overcurrent
E07
Over-voltage protection
3210 Overvoltage inside the device
E08
EEPROM error
6320 Parameter Error
E09
Under-voltage error
3220 Undervoltage inside the Device
E10
Current detection error
5210 Measurement Circuit
E11
CPU error
6100 Internal Software
E12
External trip
9000 External Malfunction
E13
USP
9000 External Malfunction
E14
Ground fault
2120 Short to Earth
E15
Input over-voltage
3110 Mains overvoltage
E16
Momentary electricity failure pro-
tection
3120 Mains undervoltage
E20
Temperature error with cooling fan
frequency lowering
4000 Temperature
E21
Inverter thermal trip
4200 Device Temperature
E22
CPU error
5000 Device Hardware
E24
Phase Failure
3130 Phase Failure
E25
Main circuit error
5410 Output Stages
E30
Driver error
5400 Power section
E35
Thermistor
7300 Sensor
E36
Braking error
9000 External Malfunction
E37
Safe Stop
9000 External Malfunction
E38
Low-speed overload protection
2221 Continuous Overcurrent no1
E40
Operator connection
5300 Operator control circuit
E41
Modbus communication error
7500 Communication
E43
EzSQ invalid instruction
6200 User Software
E44
EzSQ nesting count error
6200 User Software
E45
EzSQ instruction error
6200 User Software
E50
…59
EzSQ user trip (0 to 9)
6200 User Software
E60
Option error (inverter communica-
tions error)
7510 Serial Interface No 1
E61
Option error (Duplicated MAC ID)
7510 Serial Interface No 1
E62
Option error (External trip)
7510 Serial Interface No 1
E63
DRT/CRT Communication lost /
idle
7510 Serial Interface No 1
E64
Illegal flexible mapping
6320 Parameter error
E65
…68
Option error (reserved)
7510 Serial Interface No 1
Summary of Contents for 3G3AX-MX2-DRT-E
