9
Basic System Description
Section 2-2
Note
Refer to section 5-1 for Troubleshooting using the LED indicators on page 33.
2-2
Basic System Description
The Option Board connects to the Master via a DeviceNet network cable.
Inverter I/O data is generally shared with the Master's I/O memory through the
DeviceNet network. Every DeviceNet communication cycle, Inverter I/O data
is collected by the Option Board and exchanged with the Master. The PC (per-
sonal computer) allows you to configure, monitor, program, diagnose and
operate the system.
2-3
Step-by-Step Basic Installation
2-3-1
Option Board Mounting
!HIGH VOLTAGE
Always switch OFF the mains power supply to the Inverter before removing
any covers. Wait for the time specified on the Inverter front cover for the
capacitors to discharge. Not doing so may result in electrical shock.
NS
(Network status)
Not lit
• Power not supplied (check Module Status
LED)
• Network power is OFF or DeviceNet connec-
tor unplugged
• Checking for node address duplication (inter-
mediate state)
Green
Lit
Network is operating normally (communica-
tions established)
Flashing
Network is operating normally, but communi-
cations have not been established.
Red
Lit
Option Board detects network communication
not possible due to Communications error:
• Node address duplication
• Bus–off error
Flashing
Option board detects communication lost. One
or more Connections are in time-out state.
Table 3 LED Indicators (continued)
Indicator
Colour
Status
Meaning
Slave
PLC
DeviceNet DRM21 Master
MX2-A
@
Inverter
+
Option Board
DeviceNet network
PC
Summary of Contents for 3G3AX-MX2-DRT-E
