PV8344F4E013
28
[In a measurement with a rotation stage]
(1)
Turn on the controller supply unit, the computer, and then launch the software.
o
Refer to
4.2 Launch
.
(2)
Set up the work configuration file.
o
Refer to
4.5 Setup of the work configuration file
.
(3)
Put the BK7 reference sample.
o
Refer to
4.14 Setting the BK7 reference sample when using the rotation stage
.
(4)
Adjust the position of the BK7 reference sample.
o
Refer to
4.15 Adjusting the position of the BK7 reference sample when using
the rotation stage
.
(5) Adjust
the
sampling
interval.
o
Refer to
4.8 Adjusting the sampling interval
.
(6)
Obtain the background value.
o
Refer to
4.9 Obtaining the background value
.
(7)
Obtain the reference value.
o
Refer to
4.10 Obtaining the reference value
.
(8)
Put the sample to be measured.
o
Refer to
4.16 Setting the sample to be measured when using the rotation stage
.
(9)
㻌
Choose an objective lens.
㻌
o
Refer to
4.3 Choosing an objective lens
.
(10) Choose the ring slit
㻌
o
Refer to
4.4 Choosing the ring slit
.
(11) Adjust the position of the sample.
o
Refer to
4.17 Adjusting the position of the sample to be measured when
using the rotation stage
.
(12) Conduct
a
spectrometry.
o
Refer to
4.11 Spectroscopy
.
(13) Check
the
result.
o
Refer to
4.18 Checking for the results
.
(14) Quit
the
application;
then
turn
off
the controller supply unit and shut down the
computer.
o
Refer to
4.19 Quit
.
