PV9576-F4E006
28
7. Installing Software
Immediately after the installation (or re-installation) of the software application, all settings are
set to their respective default values. After you have installed the software application, be sure
to execute wavelength calibration by following the instruction manual of the relevant product that
you are using.
(1) Place the CD-ROM into the CD-ROM drive.
(2) Double-click
setup.exe
in the CD-ROM to execute it. A warning related to the user
account control may be displayed depending on the settings of the computer used.
Click the
Yes
button to proceed with the installation.
(3) In the first screen, click the
Next
button to proceed.
(4) In the following screen, click the
Install
button to proceed.
(5) In the last screen, click the
Finish
button to complete the installation.
