Olympus USPM-RU-W Series Operation Manual Download Page 132

Page: 132 / 166

PV9576-F4E006 13

4. Installing the CT Camera Driver

The operations in this chapter do not include any wiring of the computer or the product used.

[Windows10]

< REVISON

㻌

A0,A1,A2,A3 >

(1) Place the CD-ROM into the CD-ROM drive.
(2) Double-click

Micron\dpinst.exe

in the CD-ROM to execute it. A warning related to the

user account control may be displayed depending on the settings of the computer used.
Click the

Yes

button to proceed with the installation.

(3)

䠥

n the following screen, click the

Next

button to proceed.

(4) In the last screen, click the

Finish

button to complete the installation.

Summary of Contents for USPM-RU-W Series







































































































































































Search results

Summary of Contents for USPM-RU-W Series

Reviews:

Related manuals for USPM-RU-W Series

Brands by name

Popular brands

Olympus USPM-RU-W Series, Operation Manual

Search results

Summary of Contents for USPM-RU-W Series

Reviews:

Related manuals for USPM-RU-W Series

Brands by name

Popular brands