PV8344F4E013
19
3. Installation and Connection
3.1. To transfer and install the main unit
When installing or transferring the main unit, take care of the following points:
Hold the base when installing or transferring the main unit.
Otherwise some failure may be caused.
Always have two or more persons install or transfer the main unit,
which weighs approx. 26 kg. Handling the unit alone may cause
injury.
Do not cause any impact to occur to the main unit when installing or
transferring it. Damages to optical parts or effects on adjustment
may result, causing failure or incorrectness.
Keep the photometric head at the lowest position during installation
or transfer. Otherwise the unit may become unbalanced.
Disconnect all cables before moving the unit. Otherwise, there is the
risk of a cable breaking or causing damage to the connectors.
Cabling must be done only after the unit is set in a stable place.
Avoid installing it in an unstable place or any place with strong
vibrations. There is a risk of the unit overturning or falling, or
personal injury.
Take the usage conditions into consideration in installing it.
Base
