58
5. Press START again to accept the value indicated for the parameter displayed, or display an
alternative by pressing
∧∧∧∧∧
or
∨∨∨∨∨
and press START.
The display shows the next parameter.
SET-UP PARAMETERS
RESOLUTION AFTER TX/COPY
6. Repeat the procedure from step 3 if you want to set the next parameter or press STOP to exit
from the menu.
DIALLING
PROGRAMMING ONE-TOUCH DIALLING KEYS
There are 30 one-touch dialling keys (01 - 30), situated on the right-hand section of the console.
On each key, you can program:
-
Facsimile number
-
Telephone number
-
Subscriber's name
-
Transmission speed (14400, 9600 or 4800 bps; the latter is useful on lines with a lot of
interference). The transmission speed set here takes priority over the speed set in the
operating configuration.
-
Elimination of echo during international and intercontinental calls.
-
Closed network. This parameter enables you to set up a limited-access communication
network. Communication is restricted by checking the last 4 or 6 digits in a receiver's or
sender's facsimile number. This parameter can only be activated if it is enabled in the
operating configuration
&
Getting the Best from Your Facsimile Machine, page 32.
I
To enter data, see the Operation Summary, page 54.
1. Press DIAL DIR.
TELEPHONE DIRECTORY
ONE-TOUCH DIALLING
