13
2. Press
∨∨∨∨∨
.
OPERATING CONFIGURATION
INSTALLATION PARAMETERS
3. Press START. The display shows the "SENDER'S NAME" parameter (already set during the
"Entering the Identification Data" procedure).
INSTALLATION PARAMETERS
SENDER'S NAME
4. Press
∨∨∨∨∨
.
INSTALLATION PARAMETERS
SENDER'S NUMBER
5. Press START.
SENDER'S NUMBER
_
6. Enter your facsimile number, including the various codes. You can set an international code
by pressing
*
before the number (the display will show the symbol "+").
7. Having typed all the digits that form the fax number, confirm by pressing START. The display
shows the next parameter.
INSTALLATION PARAMETERS
DIAL TYPE
8. Press START.
DIAL TYPE
PUBLIC TEL. NETWORK
9. This parameter indicates the type of connection used. You can select either the public network
or a private exchange. In most cases the telephone line will be connected to the public network.
If this is the case, skip to step 10.
ONLY IF THE LINE IS CONNECTED TO A PRIVATE EXCHANGE
If your machine is connected to a private branch exchange, press
∨∨∨∨∨
to select this type of
connection.
DIAL TYPE
PRIVATE BRANCH EXCHANGE
