7
1. Remove the front cover of the
paper cassette by releasing and
lifting it upwards.
3. Close the cover by pushing
down on both sides until it clicks
into position.
PREPARING THE MACHINE FOR USE
Lift open the document support and the document tray as shown in the figure below and connect
the power cable.
ADJUSTING THE PAPER CASSETTE
IMPORTANT: The size set on the paper cassette must correspond to the one selected by means
of the configuration parameter "PRINT FORMAT"
&
Getting the Best From Your
Facsimile Machine, page 32.
2. Holding it at the bottom, move
the internal side part shown in
the figure above. Move from
left to right, to switch from A4 to
Letter and Legal. From right to
left to switch from Letter and
Legal to A4.
