Olivetti d-Copia 283MF Operation Manual Download

Page: 360 / 438

Troubleshooting

10-12

OPERATION GUIDE

Remove the paper jammed at the MP tray.

Reload the MP tray. Open and close the top cover
to clear the error and the machine warms up and
resumes printing.

Paper Cassette/Paper Feeder

Follow the steps below to clear paper jams in paper cassette or paper feeder.

Pull out the cassette or optional paper feeder.

Remove any partially fed paper.

IMPORTANT:

Do not try to remove paper that has

already been partially fed. Proceed to

Inside the

Machine on page 10-14

NOTE:

Check to see if paper is loaded correctly. If not,

reload the paper.

Push the cassette back in securely. The machine
warms up and resumes printing.

Duplexer

Paper is jammed in the duplexer. Remove the jammed paper using the procedure given below.

Pull the paper cassette all the way out of the
machine.

Summary of Contents for d-Copia 283MF























































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 283MF

Reviews:

Related manuals for d-Copia 283MF

Brands by name

Popular brands

Olivetti d-Copia 283MF, Operation Manual

Search results

Summary of Contents for d-Copia 283MF

Reviews:

Related manuals for d-Copia 283MF

Brands by name

Popular brands