Olivetti d-Copia 283MF, Operation Manual

Page: 351 / 438

Troubleshooting
OPERATION GUIDE 10-3
10
Copies have a moire
pattern (dots grouped
together in patterns
and not aligned
uniformly). Is the original a printed
photograph? Set the image quality to [Photo]. 5-12
Printouts are not
clear. Did you choose appropriate
image quality for the original? Select appropriate image quality. 5-12
Printouts are dirty. Is the platen or the document
processor dirty? Clean the platen or the document
processor. —
Is the charger wire dirty? Clean the charger wire. —
Printouts are fuzzy. Is the machine being used in
very humid conditions? Clean the charger wire. —
Images are skewed. Are the originals placed
correctly? When placing originals on the
platen, align them with the original
size indicator plates. 2-44
When placing originals in the
optional document processor, align
the original width guides securely
before placing the originals. 2-45
Is the paper loaded
correctly? Check the position of the paper
width guides. 2-45
Paper often jams. Is the paper loaded
correctly? Load the paper correctly. 2-28
Is the paper of the supported
type? Is it in good condition? Remove the paper, turn it over, and
reload it. 2-28
Is the paper curled, folded or
wrinkled? Replace the paper with new paper. 2-28
Are there any loose scraps or
jammed paper in the
machine? Remove any jammed paper. 10-11
Printouts are
wrinkled. Is the paper damp? Replace the paper with new paper. 2-28
Is the paper set in a proper
orientation? Change the orientation in which the
paper is positioned. —
Symptom Checkpoints Corrective Actions
Reference
Page