Olivetti d-Copia 283MF, Operation Manual

Page: 394 / 438

Management
11-28 OPERATION GUIDE
Use the procedure below to specify the counter limits.
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account], and then press
the
OK key.
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to
Adding a User on page 11-6 for
the default login user name and password.
NOTE:
• Refer to Character Entry Method on Appendix-5 for
details on entering characters.
• If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
4
In the User/Job Account menu, press the U or V
key to select [Job Account. Set.].
5
Press the OK key. The Job Account. Set. menu
appears.
6
Press the U or V key to select [Default Setting].
Sys. Menu/Count.:
a b
*********************
2
User Property
3
Common Settings
[ Exit ]
1 User/Job Account
Login User Name L b
*******************
Login Password:
[ Menu ] [ Login ]
User/Job Account:
a b
1
User Login Set.
*********************
3
Unknown ID Job
[ Exit ]
2
Job Account.Set.
Job Account.Set.: a b
1 Each Job Account
2 Account. List
*********************
[ Exit ]
3 Default Setting