Olivetti d-Copia 283MF Operation Manual Download

Page: 343 / 438

Maintenance

OPERATION GUIDE

9-3

Lift the developer unit together with the toner
container out of the machine.

Remove the drum unit from the machine by holding
the green levers with both hands.

NOTE:

The drum unit is sensitive to light. Never

expose the drum unit to light for more than five
minutes.

Place the drum unit flat on a clean, level surface.

IMPORTANT:

Do not place the drum unit on end.

Use a clean, lint free cloth to clean dust and dirt
away from the metal registration roller.

IMPORTANT:

Take care not to touch the transfer roller

(black) during cleaning.

Summary of Contents for d-Copia 283MF























































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 283MF

Reviews:

Related manuals for d-Copia 283MF

Brands by name

Popular brands

Olivetti d-Copia 283MF, Operation Manual

Search results

Summary of Contents for d-Copia 283MF

Reviews:

Related manuals for d-Copia 283MF

Brands by name

Popular brands