Olivetti d-Copia 2000, Operation Manual

Page: 36 / 604

Preparations
2-2 OPERATION GUIDE
Loading Paper
Paper can be loaded into the copier via the cassette or MP tray.
Before Loading Paper
When you open a new package of
paper, fan through the sheets to
separate them slightly prior to
loading. If the paper is curled or
folded, straighten it before
loading. Paper that is curled or
folded may cause paper jams.
IMPORTANT: If you copy onto used paper (paper already used for
copying), do not use paper that is stapled or clipped together. This may
damage the copier or cause poor image quality.
Set the paper in the cassette with
the side which faced the top of its
packaging facing up.
IMPORTANT: When using paper that has been run through a copier
before, check it to make sure that all staples and paper clips have been
removed. Attempting to copy paper that has fasteners attached may result
in poor images or malfunctions.
Straighten out any creases or curls in the paper before loading it into the
cassette. Failure to straighten out creases and curls may lead to paper
misfeeds.
Leaving paper out of its package
under high temperature and high
humidity conditions may lead to
problems caused by ambient
moisture. After loading paper into
cassette, store the remaining
paper sealed in the paper storage
bag. Also, before leaving the
copier in disuse for a prolonged
period of time, remove the paper
from the cassette and seal it in the paper storage bag to protect it from
moisture.
Special Types of Paper
The size of the paper to be accommodated by the cassette or MP tray can