Olivetti d-Copia 2000, Operation Manual

Page: 92 / 604

System Setting
5-16 OPERATION GUIDE
The setting of Custom Size 1 is shown here as an example. To set Custom
Size 2 select
25.Custom Size 2
in the System Menu and then perform
the same settings.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7 .)
2
Press
U
or
V
to display the
24.Custom
Size1
.
3 Press [OK] .
4 Press U or V and select the size. The paper sizes displayed are as shown
in the table below. When selecting Irregular Sizes, carry out the following
procedure. In the case of the selection of other sizes, proceed to Step 9.
5
Press [OK] . The Width can be input after 2 blinks.
6 Press U or V and input the Length Size.
3.88 to 11.63(")/98 to 297 (mm): The range
in which setting is possible.
7 Press [OK] . The Width can be input after 2 blinks.
System Menu:
24.Custom Size 1
Inch specifications Metric specifications
A3 R B5 R
A4 R B6 R
A4 A6 R
A5 R Cardstock
A6 R Ledger R
B4 R Legal R
B5 R Letter R
B5 Letter
B6 R Statement R
11×15" R Oficio 2
Folio R 11×15" R
Cardstock Customized Size
Customized Size
Non-std size L
297mm