Olivetti d-Copia 2000, Operation Manual

Page: 59 / 604

Copying Functions
OPERATION GUIDE 4-5
When the original has been set on the
platen and the scanning of the original
completed,
Place next original.
is
displayed and the 2-Sided Copy display
blinks. When this occurs, carry out the
following procedure.
5 Replace the original with the next one and press [Start] .
The copier will scan the original.
6 If there are no more originals to be scanned, press [2-sided] or [OK] . The
copier will begin copying.
2-Sided Copy Reverse Side Rotation Setting
Follow the procedure below to change the rotation setting for the reverse
side when making 2-Sided copies.
1 Press [2-sided] for 3 seconds. The System
Menu for the reverse side setting of 2-Sided
Copies will be displayed.
2 Press U or V and select
Rotation On
in the case where the reverse side
is to be rotated or
Rotation Off
when it isn’t to be rotated.
3 Press [OK] . The display will blink and the copier will return to the state
where copying can be continued.
Place next
original.
42.Duplex 2nd
Rotation On