Olivetti d-Copia 2000, Operation Manual

Page: 103 / 604

Job Accounting
OPERATION GUIDE 6-3
3
After completing each setting, press
U
or
V
to display
00.Set Completed
.
4
Press [OK] .
Department ID Code Registration
A Department ID Code of up to 8 digits can be entered.
1 Display the Job Accounting. (Refer to Job Accounting Operations
Procedures on page 6-2 .)
2 Press U or V to display
02.Register
code
.
3 Press [OK] .
4
Input the Department ID Code to be registered (up to a maximum of 8
digits) using numeric keys.
Number from 0 to 99999999 can be input.
NOTE:
If a mistake is made during input it can be cleared by pressing
[Stop/Clear] and the value reentered.
5
Press [OK] . The code that was input will flash on and off.
6 After confirming the code that was input, press [OK] . The display will return
to that of Step 2.
NOTE:
If an existing Department ID Code is attempted to be registered,
an error will occur and
Already registered.
will display in the
message display. In this case, register a different Department ID Code.
Deleting Department ID Codes
Deleting a registered Department ID Code.
1 Display the Job Accounting. (Refer to Job Accounting Operations
Procedures on page 6-2 .)
2 Press U or V to display
03.Delete
code
.
Job Accounting:
00.Set Completed
Job Accounting:
02.Register code
Job Accounting:
03.Delete code