Olivetti d-Copia 2000, Operation Manual

Page: 65 / 604

Copying Functions
OPERATION GUIDE 4-11
1
Set the original.
NOTE:
The Border Width can also be set in the System Menu. (Refer to
Setting the Border Width on page 4-11 .)
The value set in the System Menu will inherit the value that is set at the
time when the copy is made.
2
Press [Border Erase] and select the type of border erase to be performed
to light up the or indicator.
3
Press [Start] . The copier will begin copying.
Setting the Border Width
Use the procedure given below to change the Border Width.
1
Press [Border Erase] for 3 seconds. The
System Menu for the Border Width will be
displayed.
2
Press
U
or
V
and select the border width.
[Inch specifications]
Select from
0.13
("),
0.25
("),
0.38
("),
0.50
("),
0.63
(") or
0.75
(").
[Metric specifications]
Select from
1
to
18
(mm).
3 Press [OK] . The display will blink and the copier will return to the state
where copying can be continued.
44.Border Erase
1mm