RANGER
®
7000 SCALES
EN-31
Note:
The output will be reset to normally open when either SP1 or SP2 is reached.
T
he I/O’s will only work when the I/O Option Board have been installed. See the Accessory list in section 9.4 for
information.
The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs
which can be used for simple process weighing.
The outputs also only work when the button corresponding to the icon
has been pressed.
Press the
button to enter the Main Menu.
With the button corresponding to the
icon, go down
the list and highlight
Application Mode
. Enter this sub-menu
by pressing the button corresponding to the
icon.
In the Application Mode menu enter the
Filling
sub-menu.
The Filling sub-menu is now displayed.
Select the list item and press the button corresponding to the
icon to change the setting as desired.
4.7 Dynamic Weighing
Use this application to weigh an unstable load, such as a moving animal. Three different start/reset modes can be
selected: Manual (start and stop via key press),
Semi-Automatic
(auto-start with manual reset), and
Automatic
(start and stop automatically).
Press the
button until
Dynamic
is displayed in the upper left portion of the home screen.
Press the button corresponding to the icon
to start averaging.
To abort the averaging press the button corresponding to the icon
.
When the averaging has finished, press the button corresponding to the icon
to reset.
