EN-22
RANGER
®
7000 SCALES
4.3.4
Input/Output (I/O) Setup
The I/O’s can be customized for various user preferences.
The I/O’s are defined below
(defaults in
Bold).
Item
Available Settings
Discrete Input 1
Off,
Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input 2
Off,
Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output 1
Off,
Under, Over, Accept, Under/Over
Discrete Output 2
Off,
Under, Over, Accept, Under/Over
Discrete Output 3
Off,
Under, Over, Accept, Under/Over
Discrete Output 4
Off,
Under, Over, Accept, Under/Over
Note:
The
I/O’s will only work when the I/O Option Board have been installed. See the Accessory list in section 9.4
for information. The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs
which can be used for simple process weighing.
Press the
button to enter the Main Menu.
With the button corresponding to the
icon, go down
the list and highlight
Application Mode
. Enter this sub-menu
by pressing the button corresponding to the
icon.
In the Application Mode menu enter the
Check
sub-menu.
The Check sub-menu is now displayed.
Select the list item and press the button corresponding to the
icon to change the setting as desired.
