EN-8
RANGER
®
7000 SCALES
2.8
Separating the Terminal from the Weighing Base
1.
To detach, press both the Release buttons inward (both at the same time) and gently pull the Terminal
towards you (outward) until the Terminal is detached. These Release buttons disengage the two hooks
holding the Terminal to the Base. A cable is attached to the Terminal. Take care to not damage or
disconnect this cable.
2.
To reattach the Terminal, press in the two Release buttons and slide the Terminal into the Base until the
Terminal hooks click and engage to hold the Terminal in place.
Release Buttons
Base and Terminal
2.9
Terminal Mounting
If desired, the Terminal may be mounted to a wall or table using fasteners (not supplied) that are appropriate for the
type of mounting surface.
2.10
Initial Calibration
When the Scale is first installed, and when it is moved to another location, it must be calibrated to ensure accurate
weighing results.
2.10.1 Internal calibration
R71MHD models have built in AutoCal which can calibrate the scale automatically and does not require calibration
masses. If preferred, the scale can be manually calibrated with external masses. Have the appropriate calibration
masses available before beginning calibration. Refer to the Calibration Section for masses and calibration
procedure.
2.10.2 External calibration
R71MD models can only be manually calibrated with external masses.
50 mm /
1.97 in
Mounting holes
