RANGER
®
7000 SCALES
EN-13
The
Configuration
screen
is now displayed.
Select the list item and press the button
corresponding to
,
to change the setting as
desired.
To return to the Application home screen, press the
button corresponding to
.
The Weighing Configurations are defined below
(defaults in
Bold
)
Item
Available Settings
Comments
Auto Tare
On,
Off
To enable Automatic Tare
Chain Tare
On
, Off
To enable Chain (Continuous) Tare
Accumulate
Off , Automatic,
Manual
To enable Accumulation / Totalization
Statistics
On
, Off
To enable Statistics
4.1.2
Accumulation
To start Accumulate weighing data, place the item on the
pan and press the button corresponding to the icon
. The top accumulation icon will start blinking. The
load to be accumulated has to be >= 5d and the next
accumulation can only start once the pan has been cleared.
Note:
The Accumulation icon
will only be shown if
Accumulate is set to Manual (see section 4.1.1).
Viewing the Statistics results
When Statistics is set to ON, press the info button
to view the statistics results.
Viewing the Accumulation results
To view the accumulation results, press the info button
then press the button corresponding to the icon
.
The
Accumulate Result
screen is displayed.
Note:
To return to home screen press the
button.
Press the
button to print Accumulation result.
