Oce CS240, Operation Manual

Page: 158 / 594

4 Basic copy operations
4-60 CS240/CS231
4.12 Selecting finishing settings
Various settings can be selected for sorting and finishing copies fed into the copy output tray.
2
Note
As the factory default, "Group" is selected.
!
Detail
If no finisher is installed and all of the following conditions are met, printed copies are fed out and sorted
in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one paper tray and with the v
orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
2
Note
From Administrator Settings mode, the machine can be set so that copies are fed out without being
shifted when the finisher is installed. As a factory default, the machine is set to shift the copies that are
fed out.
For details on specifying settings for shifting copies that are fed out when the finisher is installed, refer
to "System settings" on page 13-22.
CS240: For details on "Fold/Bind", refer to "Selecting a folding setting" on page 4-71.
CS231 For details on "Fold/Bind" and “Center Staple / Fold”, refer to "Selecting a folding setting" on
page 4-71.
The following Finishing settings are available.
Setting Description
Sort Select this setting to separate each set of a multi-page document.
Group Select this setting to separate the copies of each page in a multi-page docu-
ment.