Oce CS240, Operation Manual

Page: 551 / 594

CS240/CS231 13-59
Utility mode 13
13.9 Color registration adjust
Adjusting the color registration for yellow, magenta and cyan
The color registration can be adjusted if color shifts can be seen in the print result.
Each color can be adjusted for plain paper, thick paper 1/1+, 2, 3 or thick paper 4.
The procedure for adjusting the color registration is the same for yellow, magenta and cyan.
The following procedure uses A3-size plain paper to adjust the color registration for cyan.
0 The test pattern can be printed on A3 w , 11 e 17 w , A4 v or 8-1/2 e 11 v paper that can only be loaded
into the bypass tray.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the administrator
settings screen" on page 13-35.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [7 Color Registration Adjust].
The Color Registration Adjust screen appears.
5
Touch [3 Color Registration Adjust (Cyan)].
The Color Registration Adjust > Cyan screen appears.
6
Load the paper into the bypass tray.
7
Press the [Start] key.
A test pattern is printed.
8
Check the distance from the reference black lines to the cyan
lines in the test pattern along the X and Y directions.
– If the lines are shifted in the X direction as shown below,
touch [-] under "X" to reduce the adjustment (between -1
dot and -6 dots).