Oce CS240 Operation Manual Download Page 233

Page: 233 / 594

CS240/CS231

6-23

Troubleshooting

Close the upper right-side door.

Pull out the tray being used, and then remove all paper from
the tray.

Load the paper into the tray again, and then close the tray.

CAUTION

The area around the fusing unit is extremely hot.

Touching anything other than the indicated levers and dials may result in burns. If you get

burnt, immediately cool the skin under cold water, and then seek professional medical
attention.

CAUTION

Precautions for toner spills

Be careful not to spill toner inside the machine or get toner on your clothes or hands.

If your hands become soiled with toner, immediately wash them with soap and water.

If toner gets in your eyes, immediately flush them with water, and then seek professional medical
attention.

Fusing unit

Summary of Contents for CS240



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CS240

Reviews:

Related manuals for CS240

Brands by name

Popular brands

Oce CS240, Operation Manual

Search results

Summary of Contents for CS240

Reviews:

Related manuals for CS240

Brands by name

Popular brands