Oce CS240, Operation Manual

Page: 109 / 594

CS240/CS231 4-11
Basic copy operations 4
Scanning the document in separate batches ("Separate Scan" setting)
A large document can be divided and scanned in a number of batches.
A maximum of 100 document pages can be loaded into the ADF at one time. However, by copying with the
"Separate Scan" setting, a document that exceeds 100 pages can be scanned and treated as a single copy
job. In addition, the scanning location can be switched between the original glass and the ADF during the
scanning operation.
0 The loading capacity of the ADF is 100 sheets of plain paper (80 g/m
2
) or 38 sheets of thick paper (210
g/m
2
).
0 The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Batch Print" is selected.
0 For details on the output method used with the "Separate Scan" setting, refer to the description for
"Separate Scan Output Method" in "Copier settings" on page 13-18.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 4-8.
2
In the Basic screen, touch [Separate Scan].
– To cancel the "Separate Scan" setting, touch [Separate Scan] again to deselect it.
3
Press the [Start] key.
After the document has been scanned, the following message appears.