Oce CS240, Operation Manual

Page: 123 / 594

CS240/CS231 4-25
Basic copy operations 4
Selecting the position of the binding margin ("Binding Position" settings)
If a double-sided document is loaded into the ADF, specify the position of the top of the back side of the
document by specifying the binding margin position for the document.
2
Note
As the factory default, "Auto" is selected as the position of the binding margin.
Document binding margin position
Document binding margin Icon Description
Left Select this setting if the document is loaded with
the binding margin at the left.
Right Select this setting if the document is loaded with
the binding margin at the right.
Top Select this setting if the document that is loaded
has a binding margin at the top.
When the document length is 297
mm or less:
When the document length is more
than 297 mm:
Auto Select this setting to automatically select the po-
sition of the binding margin.
If the document length is 297 mm or less, a bind-
ing position along the long side of the paper is se-
lected.
If the document length is more than 297 mm, a
binding position along the short side of the paper
is selected.
2
Note
If "Auto" is selected, the binding margin is set
at the top or at the left.