Oce CS240, Operation Manual

Page: 162 / 594

4 Basic copy operations
4-64 CS240/CS231
Separating copies by pages ("Group" Setting)
0 As the factory default, "Group" is selected.
0 CS231: If finisher FS-519 is installed, the output tray can be selected. For details, refer to "Selecting the
output tray (CS231)" on page 4-65.
0 If offset sorting is selected while no finisher is installed, printed copies will be fed out and sorted in an
alternating
w and v pattern if the following conditions are met.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
0 If offset sorting is selected while a finisher is installed, printed copies are fed out and stacked on top of
each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Group].
– To separate each set of pages, touch [Yes] under "Offset".
3
Touch [OK].
The Basic screen appears again.