Oce 5250, User Manual

Page: 142 / 198

142 Océ 5250 user manual
Banner messages
A banner message appears on the media, at the end of the print, whenever the
printer detects an error in the course of a print.
■
When using cut sheet media: at the end of the problem print, the display
reads ‘Print pending’. Load a new cut sheet. The printer then prints out the
banner message.
■
When using roll media: at the end of the print, the printer prints out the
banner message after the cut marks or the actual cut.
The following are possible banner messages:
initRaster Allocation Failure on normal processing
indicates a memory
allocation failure at the start of rasterization process during normal processing.
The printer discards the file, and prints nothing.
initRaster Allocation Failure on the fly mode
indicates a memory allocation
failure at the start of rasterization during on the fly processing. The printer
discards the file, and prints nothing.
Not enough memory for rasterization in polygon buffer
indicates a memory
allocation failure in polygon rasterization. The printer prints out the file until
the error occurrence.
Too many vectors: not enough memory
indicates a memory allocation failure
in vector rasterization during on the fly processing. The printer prints out the
file until the error occurrence.
Solutions
■
Verify how much memory (RAM) you have on the printer (print out a list of
the configuration settings, (see ‘Printing the dump configuration’ on
page 81). Expand the size by installing an extra RAM module (see
‘Expanding the printer memory’ on page 96).