![background image](http://html2.mh-extra.com/html/oce/5250/5250_user-manual_3221489090.webp)
90
Océ 5250 user manual
▼
▼
▼
▼
To print the X-accuracy print
1
Press the ‘down’ arrow once to enter the menu.
2
Follow the flowchart path to get to ‘x-accuracy’.
3
Press ‘enter’.
▼
▼
▼
▼
To calculate the adjustment value
1
Measure the X direction side (vertical side) of the printed square.
2
If the measured value is:
■
greater than 500, enter a negative adjustment value.
■
less than 500, enter a positive adjustment value.
The value range is between -1 mm and +1 mm, by increments of 0.1 mm. On
the control panel, this is equivalent to the range of -10 to +10. Example: If you
measure 499.6 mm, enter ‘+4’.
Note:
Be aware that your changes are not taken into account on the
X-accuracy print because that print is only a reference print (see ‘Printing the
X-accuracy print’ on page 89).
Configuration
Media type
Calibration
Utilities
X-accuracy
Summary of Contents for 5250
