Oce 5250, User Manual

Page: 50 / 198

50 Océ 5250 user manual
▼ ▼ ▼ ▼
To align the cut sheet media
1
Adjust the media so that its edges flush with the vertical and horizontal
reference marks.
2
Raise the green lever to fix the media (see figure 34).
[36] Aligning the cut sheet media
3
Close the dust cover. The displays reads:
4
Set the media mode to ‘cut sheet’ (see chapter , ‘Selecting a media mode’ on
page 42).
5
Press ‘enter’. The printer detects and loads the media. When the media aligns
correctly, the display reads ‘ready’.
Note:
If the media is not correctly aligned the control panel display reads:
Note:
Follow the instructions in the previous section, to align the media
correctly.
Horizontal reference mark
Vertical reference mark
NO MEDIA
PRESS ENTER TO INSTALL MEDIA
MEDIA MISALIGNED
REALIGN MEDIA AND PRESS ENTER