Oce 5250, User Manual

Page: 158 / 198

158 Océ 5250 user manual
Printing via LPD
After the network connection for the Océ 5250 has been set up (see
‘Connecting to an Ethernet port’ on page 153), you can print via LPD.
The Océ 5250 uses only one queue thus the queue name itself is not important,
and you are free to use the queue name you want (e.g. queue 1).
For setting the client side, please contact your system administrator.
Printing via FTP
After the network connection for the Océ 5250 has been set up you can print
via FTP.
Note:
The Océ 5250 is web browser compatible and thus the Océ 5250 printer
can be accessed like any FTP site from your web browser.
Note:
For FTP on UNIX systems, please contact your system administrator.
▼
▼ ▼
▼
Printing via FTP (MS-DOS mode)
Note:
Although FTP is not a standard printing protocol, you can send data files
to a remote directory via FTP. This remote directory then allows the data files
to be printed.
1
Start the MS-DOS prompt.
2
Enter the ‘ftp’ command.
3
Open a FTP session with the printer using its address or the registered name
(HOSTS or DNS).
Note:
Instead of performing steps 2 and 3 you could also enter “ftp
host_name” in the FTP client.
4
Enter your user name (e.g. ‘Guest’).
A connection is now set up for the default user ‘Guest’.
5
In order to be connected to the remote server, you then validate the user
connection by typing in the user password (e.g. ‘Guest’).
Note:
As there is no registered user, you can simply press Enter to initiate
the connection. User name and password are not checked by the Océ 5250.
6
Set the transmission mode to binary by entering ‘binary’.
7
Go to the jobs directory using the following command: ‘cd jobs’.
8
Go to the local directory in which the data you want to print are stored (for
example C:\DRAWINGS) by using the following command: