O2 Xda Atom, Getting Started

Page: 58 / 198

58
4
Getting connected
A new standard modem is now set up
successfully on your PC, but you still need to
create a new dial-up connection:
1.
Click Start > Settings > Control Panel
> Network and Dial-up Connections >
Make New Connection .
2. To continue, tap Next .
3. Select Dial-up to the Internet . Tap Next .
4. Enable the option I want to set up my
Internet connection manually , or I
want to connect through a local area
network (LAN)
button, and Next .
5. Select I connect through a phone line
and a modem option, and then Next .
6. Enable the Use area code and dialing
rules checkbox and enter the telephone
number *99# , and then Next .
7. Enter the username and password you
use to log on to your ISP, and then click
Next .
8. Enter a name for this connection, and
then
Next .
9. Select No when the installation wizard
asks you to set up an Internet mail
account, and then click
Next .
10. After the installation is completed, click
Finish .
Connecting via USB Port
As with connection via USB Port, you need
to check the following before you start using
the Wireless Modem on your Xda Atom via
USB connection:
• Make sure that a GPRS enabled SIM
card is inserted in your Xda Atom.
• Disable the ActiveSync com port
connection of your PC.
• Disable the Infrared function by tapping
the
Start menu > Settings > the
Connections tab > Beam , and then
uncheck Receive all incoming beams.
• Connect your Xda Atom to your PC USB
connection (using the USB sync cable).
Before setting up a USB modem, you must
verify that you have the two
fi les, USBMDM
and USBModem_Dialer on the Companion
CD. Insert the Companion CD into the CD-
Rom of your PC and perform the settings as
follows:
1.
Tap the Start menu > Programs >
Wireless Modem .
2. Select the USB connection type from the
drop-down list and insert the USB cable
adapter.
3. Tap the Start button on the Wireless
Modem screen of your Xda Atom.
4. A Found New Hardware message will
pop up on your desktop PC.
5. Select the Display a list of the known
drivers for this device so that I can
choose a speci
fi c driver option, and
then click Next .
6. Select Modem from the Hardware types
list, and then Next .
7. Click the Have Disk button, and then
Next .