NorthStar 961 Reference Manual Download Page 279

Page: 279 / 404

Chapter 13 - Customizing Setup Functions

961/962 Operations and Reference Manual, Rev. A

Page 13-9

Owner’s message display screen

3. To enter your personalized message to appear on the

OWNER’S MESSAGE

screen, press the

EDIT

key, then use

the

KEYPAD

to type in the message. Usually, this message

consists of the owner’s name and the name of the vessel.

4. Press the

ACCEPT

key (or press

CANCEL

to leave the

owner’s message blank or the same as before).

Turning on the security system

1. At the

OWNER’S MESSAGE DISPLAY

screen, press the

CURSOR PAD

to highlight the

SECURITY

field.

2. Press the

EDIT

key.

3. Press the

CURSOR PAD

left to highlight the

field,

then press the

ACCEPT

key (or press

CANCEL

to leave

the option unchanged).

By turning on the security system, you’ll always have to
use the

KEYPAD

to enter either the Northstar- or

user-defined password at the

OWNER’S MESSAGE

screen

(this password will be hidden as you type on the screen)
each time you turn on the system.

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Brands by name

Popular brands