NorthStar 961, Reference Manual

Page: 157 / 404

Chapter 6 - Creating Waypoints
961/962 Operations and Reference Manual, Rev. A Page 6-15
• update a waypoint’s coordinates to be the same as your
vessel’s position.
To move a waypoint to another location:
1. At the
CHART
screen, press the
CURSOR PAD
and if
necessary, the
LEFT ARROW
and
RIGHT ARROW
keys, to
select a named waypoint, then press the
CURSOR
menu
key.
2. Press the
EDIT
key.
The CHART screen appears, showing the selected
waypoint.
3. Press the
CURSOR PAD
to move the cursor and the
waypoint to the desired location.
4. Press the
DONE
key to store the waypoint coordinates to
the waypoint database (or press the
CANCEL
key to
cancel).
5. If this waypoint is used in the trip or one or more routes,
you’ll always be asked if you want to keep the original
coordinates as unnamed points in the trip or routes (if so,
press the
KEEP OLD COORDS
key), or use the new
coordinates instead (press the
USE NEW COORDS
key).
The CHART screen appears, showing the new location of
the waypoint and its position data in the CURSOR INFO
BAR .
To update a waypoint’s coordinates to be the same as your
vessel’s position:
1. At the
CHART
screen, press the
CURSOR PAD
to select an
existing waypoint, then press the
CURSOR
menu key.
2. At the
SELECTED WAYPOINT
dialog box, press the
EDIT
key.
3. When your vessel is at the position where you want the
selected waypoint to be, press the
UPDATE
key.
4. If the selected waypoint is used in one or more routes or
the trip, you’ll be asked if you want to keep the original
coordinates as unnamed points in the route or trip (if so,