86
SS300 Service Information (3-2017)
SERVICE
2. Disconnect the transaxle motor electrical
connection.
NOTE: This must be done to keep the machine
stationary during the brush pattern test.
3. Turn off ec-H2O (if equipped) and disconnect the
conventional water valve from the wire harness.
NOTE: This must be done in order to keep water
from washing away the chalk that has been applied
to the floor. Purge any residual water, at another
location, by running the brushes for 30 seconds
before proceeding to Step 4.
4. Move the scrubber so that the brushes are
positioned over the chalk.
5. Set parking brake.
6.
Lower the scrub head to the floor and activate
scrub brushes for 20 seconds and then release
the handle.
