SS300 Service Information (3-2017)
41
TROUBLESHOOTING
BDI (Battery
Discharge
Indicator)
☼ = Flashing
Pro-Panel
LCD
Faults
(Option)
Fault Condition
Reason
Correction
☼ ● ● ● ☼
0x0924
Propel High
Battery Voltage 2
Warning
Controller detects battery voltage has
exceeded approximately 45V on 24V
controllers and approximately 49.5V
on 36V controllers.
Check condition of batteries,
connectors, and relevant wiring
to controller. If trip is still present
after the batteries, connectors,
and wiring have been checked,
controller may be defective.
Replace controller.
0x0925
Propel Inhibit 1
Warning
Controller detects Inhibit 1 input is
active, Inhibit 1 Speed has been set
to ‘0’ and Inhibit 1 Operation has been
set to ‘Latched’.
Check state of input, Inhibit 1
programming, connectors, and
relevant wiring to controller. If
trip is still present after state of
input, programming, connectors,
and wiring have been checked,
controller may be defective.
Replace controller.
0x0926
Propel Inhibit 2
Warning
Controller detects Inhibit 2 input is
active, Inhibit 2 Speed has been set
to ‘0’ and Inhibit 2 Operation has been
set to ‘Latched’.
Check state of input, Inhibit 2
programming, connectors, and
relevant wiring to controller. If
trip is still present after state
of the input, programming,
connectors, and wiring have
been checked, controller may
be defective. Replace controller.
0x0927
Propel Inhibit 3
Warning
Controller detects Inhibit 3 input is
active, Inhibit 3 Speed has been set
to ‘0’ and Inhibit 3 Operation has been
set to ‘Latched’.
Check state of input, Inhibit 3
programming, connectors, and
relevant wiring to controller. If
trip is still present after state
of the input, programming,
connectors, and wiring have
been checked, controller may
be defective. Replace controller.
0x0928
Propel Watchdog
Warning
1. Propel controller watchdog tripped.
Power cycle machine.
0x0929
Propel Bad
Setting Warning
1. Bad setting programmed to iDrive.
Reprogram iDrive.
0x092A
Propel Direction
Inputs Disagree
iDrive unit is faulty.
Replace iDrive.
0x092B
Propel Positive
Feedback
Voltage Null
iDrive unit is faulty.
Replace iDrive.
0x092C
Propel Positive
Feedback
Voltage Out of
Range
iDrive unit is faulty.
Replace iDrive.
FAULTS (Cont’d)
