SS300 Service Information (3-2017)
101
SERVICE
5. Disconnect electrical connections and remove
I-Drive mounting screws (2).
INSTALLING I-DRIVE MODULE (OPTION)
FOR SAFETY: When servicing machine,
disconnect battery connections before working
on machine.
1. Installation is reverse of removal.
2. The new I-Drive module must be programmed
to operate in the scrubber. See SERVICE
DIAGNOSTICS TOOL in the SERVICE section of
this manual.
REMOVING ONBOARD BATTERY CHARGER
(OPTIION)
FOR SAFETY: When servicing machine,
disconnect battery connections before working
on machine.
1. Key Off and batteries disconnected.
2. Remove T-25 torx mounting screws (2).
3. Carefully lower access cover.
4. Disconnect charger electrical connections.
