INTRODUCTION
This manual is available for each new model. It provides
necessary operation and maintenance instructions.
Read this manual completely and un-
derstand the machine before operating
or servicing it.
This machine will provide excellent service. However, the
best results will be obtained at minimum costs if:
• The machine is operated with reasonable care.
• The machine is maintained regularly - per the machine
maintenance instructions provided.
• The machine is maintained with manufacturer supplied
or equivalent parts.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials and
used machine components such as batteries in
an environmentally safe way according to your
local waste disposal regulations.
Always remember to recycle.
Tennant Company
PO Box 1452
Minneapolis, MN 55440
Phone: (800) 553- 8033 or (763) 513- 2850
www.tennantco.com
Pro-Membrane, Membrane, Severe Environment, Zone Settings,
Quite-Mode are US registered and unregistered trademarks of Tennant
Company.
Trojan and HydroLINK are registered trademarks of Trojan Battery
Company.
This product may contain portions of software that have various 3rd
party licenses. More information can be found at: www.tennantco.com/
opensource
Specifications and parts are subject to change without notice.
Original Instructions. Copyright © 2015- 2017 Tennant Company. All rights
reserved.
INTENDED USE
The automatic floor scrubber is intended for commercial
use, for example in hotels, schools, hospitals, factories,
shops, offices and rental businesses. It is designed to
scrub hard floor surfaces (concrete, tile, stone, synthetic,
etc.) in an indoor environment. Do not use this machine on
carpeted surfaces. Use only recommended pads/brushes
and commercially available floor cleaning detergents. Do
not use this machine other than described in this Operator
Manual.
MACHINE DATA
Please fill out at time of installation for future reference.
Model No. - ___________________________________________
Serial No. - ___________________________________________
Installation Date - ______________________________________
SERIAL NUMBER LOCATION
UNCRATING MACHINE
Carefully check machine for signs of damage. Report
damages at once to carrier. Contact distributor or Tennant
for missing items.
To uncrate the machine, remove straps, wheel blocks and
shipping brackets. Using the supplied ramp carefully back
the machine off the pallet. Make sure scrub head is in the
raised position.
ATTENTION: Do not remove machine from pallet
without using ramp, machine damage may occur.
