32
SS300 Service Information (3-2017)
MAINTENANCE
On-board battery charger: The battery discharge
indicator lights will ripple back and forth during the
charging cycle. When all five lights repeatedly flash
two times, the charging cycle is complete (Fig. 111).
T300e/T300
T300 LCD
Fig. 111
6. After charging batteries unplug the power supply
cord and wrap cord around the cord hooks (Fig.
112). For models equipped with an off-board
charger, Always disconnect the AC power supply
cord first before disconnecting charger from
machine.
Fig. 112
SQUEEGEE BLADE REPLACEMENT
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off machine,
remove key and set parking brake if equipped.
Each squeegee blade has four wiping edges. When
the blades become worn, simply rotate the blades
end-for-end or top-to-bottom for a new wiping edge.
Replace blade if all four edges are worn.
1. Remove the squeegee assembly from the
machine.
2. Fully loosen the two outside knobs on squeegee
assembly. This will separate the spring loaded
blade retainer from squeegee frame (Fig. 113).
To loosen the knobs quickly, squeeze the blade
retainer and squeegee frame together.
Fig. 113
3. Remove worn blade(s) from the blade retainer
(Fig. 114)
Fig. 114
