SS300 Service Information (3-2017)
79
SERVICE
BATTERY CHARGER SETTINGS
The battery charger is set to charge the battery type
supplied with your machine. If you choose to change
to a different battery type or capacity, the charger’s
charging profile must be changed to prevent battery
damage.
The machine’s battery discharge indicator (BDI) must
also be reprogrammed to match battery type to pre-
vent battery damage and/or short run- time.
NOTE: For machines shipped without batteries, the
battery discharge indicator and the on- board battery
charger are set for GEL batteries as the default.
If you choose to use a different battery type, the
settings must be changed as described as below.
NOTE: For machines shipped without batteries and
supplied with an Off- Board Charger, the off- board
battery charger is set for wet lead- acid batteries from
the factory. The machine’s battery discharge indicator
is set for GEL batteries as the default. The machine’s
battery discharge indicator must be reprogrammed to
match charger settings (See OFF-BOARD BATTERY
CHARGER below).
OFF-BOARD BATTERY CHARGER:
To change the off-board battery charger settings, See
CHANGING OFF-BOARD BATTERY CHARGER
SETTINGS.
To reprogram the machine’s battery discharge indica-
tor (BDI), service application software is required,
CHANGING OFF-BOARD BATTRY CHARGER
SETTINGS
1. Disconnect charger from the machine and plug
charger into power supply.
The middle LED will blink upon startup and the
screen display “No Battery”.
BLINKING
YELLOW
2. Press and hold the two outside arrows for 12
seconds or until the middle lED turns solid yellow.
SOLID
YELLOW
