SS300 Service Information (3-2017)
85
SERVICE
8. Remove lift mechanism mounting bolts (2).
Note the orientation of the spacers and nylon
washers for reassembly. Also, note the hole selection
for the configured scrub head type.
9. Remove scrub head assembly.
INSTALLING SCRUB HEAD ASSEMBLY
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off machine,
remove key and disconnect batteries.
1. Installation is the reverse of removal.
2. Cylindrical Head Option Only: There are required
brush pattern adustments on the cylindrical
scrub head (See CHECKING AND ADJUSTING
CYLINDRICAL SCRUB BRUSH PATTERN in the
SERVICE section of this manual).
CHECKING AND ADJUSTING CYLINDRICAL
SCRUB BRUSH PATTERN
NOTE: This procedure must be completed using a
new set of brushes. Following this procedure using
worn brushes may result in uneven brush wear and
shortened brush life.
1.
Apply chalk to a flat, level surface.
