74
SS300 Service Information (3-2017)
SERVICE
7. The Service Diagnostics tool now connects to the
control module network.
8. The Service Diagnostics tool will automatically
detects a new interface module installation. Enter
the model and serial number and then click on
the arrow button.
9.
Inspect the actual machine configuration and
match applicable configurations from the drop-
down menus and then click on the arrow button.
10. The programming process begins and all of the
control modules are updated (if applicable).
11. The Service Diagnostic tool may prompt to
cycle the key switch off/on during the process.
If prompted, click on the OK button and then
cycle the key switch to allow the programming to
continue.
12. Cycle the key switch to save selections.
