Nidek Medical HandyRef-K, Operator'S Manual

Page: 85 / 130

79
OPERATING PROCEDURE: Memory Data Management
4
During printing, the message “NOW PRINTING… □ / □ ” is displayed.
Pressing the STOP button cancels the printing from the next data.
When printing is complete, the message “NOW PRINTING…
□ / □ ” disappears.
3.10.3 Printing selected data
Select the measured data saved in the main body to be printed.
By the
“ 33. MEMORY PRINT” (page 92) parameter, printing only (PRINT), data output only (OUT-
PUT), or both (BOTH) can be selected.
When “PRINT” is selected, even if the
“ 93. OUTPUT TO RT” (page 98) parameter is set to “YES”, the
data is not output to the refractor.
1
Display the MEMORY DATA MANAGE-
MENT screen.
1)
Press to display page .
2)
Press to display the MEMORY DATA
MANAGEMENT screen.
2
Select “PRINT” with
or button
and
press .
The data print screen appears (the list of date, time,
No. and SPH data for the right eye).
• The printing contents differ depending on the parameters.
• Printing is possible as many times as desired until the saved data sets are deleted.
• For infrared communication, select each data one by one for printing. Multiple data cannot be
selected to be printed at the same time.