17
INTRODUCTION: Configuration
14
Power switch
Turns on
or off
the AC power to the station.
15
Power inlet
The power cable is connected here.
16
USB port
The optional barcode scanner or magnetic card reader is connected here.
17
Serial port (RS-232C)
The refractor or EyeCa-RW2 is connected here for outputting data.
18
LAN port
The LAN cable is connected here for outputting data to a computer or such.
19
Connection cable port
The cable connecting the main body and station is connected here.
CAUTION
• Equipment connected to the analog or digital interfaces must be certified according to the represen-
tative appropriate national standards (such as EN 60601-1 and IEC 60601-1). Furthermore, all con-
figurations shall comply with the system standard IEC 60601-1. Anyone who connects additional
equipment to the signal input part or signal output part configures a medical system, and is therefore
responsible that the system complies with the requirements of the system standard IEC 60601-1.
If in doubt, consult the technical service department of your local representative.
16 17 18 19
[Rear view of the station]
14 15
